EATON POWERWARE FILTERS & SURGE DIVERTERS

The POD protects your precious Computer System, Home Entertainment System and other valuable electronic equipment from surges, spikes and noise cause by lightning and other power disturbances. Its series power filter provides superior protection against surges and spikes, with the additional benefit of protecting against line noise that may affect sensitive equipment. With a surge rating of 60kA, the POD out-performs and out lasts many other products that provide shunt-only protection.

6 Way Power Filter, phone, network, coax

8 Way Power Filter, phone, network, coax, TV

The unique mounting system allows mounting in many different modes to suit crowded racks. Even if no rack space exists, the units may be mounted externally on the front or rear of the rack! For horizontal mounting, the units requires a single 1RU (44mm) rack space for installation. For vertical mounting, the units requires 3RU (132mm) of rack space. The units may also be flush mounted to either side of a rack, cabinet or trolley.

The SSFi is a surge power filter that provides protection for sensitive electronic equipment. Supplied in a rugged steel case, it’s available in 10A and 15A models.

The most effective way of providing primary protection is with the use of surge diverters such as the PW-DINVSD1R, SPD120i, SPD3Ni and SPD3Gi. Mounted at the main switchboard, these surge diverters dissipate any damaging surges safely to the mains earth, preventing damage to switchboards, wiring and more importantly, your valuable equipment. The remaining surge remnants and noise can be controlled with the use of surge power filters close to the equipment (secondary protection). These may take the form of simple ‘plug-in’ filters (POD, POD+ and SSFi), or ‘hard-wired’ filters (CSFi and DSFi) for higher currents.

The CSFi is designed for mounting in distribution boards to provide secondary protection against power surges caused by external sources such as lightning strikes and substation switching as well as providing a measure of protection from surge events generated on the secondary side of the filter. The CSFi is a 3-stage protection unit utilising primary and secondary MOV protection in conjunction with a Low-Q LC filter. In addition, the unit also provides filtering of the line harmonics, noise and RF transmitters with a cut-off frequency of

The DSFi provides secondary protection against power surges caused by external sources such as lightning strikes and substation switching as well as providing protection from surge events generated on the secondary side of the filter. Its 3-stage protection unit utilises primary and secondary MOV protection in conjunction with a Low-Q LC filter. In addition, the unit also provide filtering of the line harmonics, noise and RF transmitters.

Dual Stage Surge Filter + Alarm (replaces HSS)

The MSFi is designed to provide point-of-entry protection against power surges caused by external sources such as lightning strikes and substation switching as well as providing a measure of protection from surge events generated on the secondary side of the filter. The MSFi is a 3-stage protection unit utilising primary and secondary MOV protection in conjunction with a Low-Q LC filter. In addition, the unit also provide filtering of the line harmonics, noise and RF transmitters with a cut-off frequency of